
Soil vs Coco vs Hydroponics: Understanding the Key Differences
, by 123 Online, 10 min reading time
Setting up your first indoor garden in New Zealand comes with plenty of decisions, but few shape your growing setup as much as the method you choose. Soil, coco and hydroponics each approach water, nutrients and root support differently.
For beginners, one of the most important early decisions is choosing how plants will receive the moisture, nutrients and support they need to grow. Understanding these differences early can help avoid unnecessary purchases and make it easier to build a setup that works.Whether you're choosing a growing medium or looking for hydroponic equipment for home growers in NZ, this guide helps you understand how soil, coco and hydroponics work to make informed choices about your growing setup.

Soil: A familiar starting point for beginners.
Coco: Offers greater control over watering and feeding.
Hydroponics: Delivers nutrients through a water-based system.
Choosing the right method: Match your growing method to your space and experience.
|
Soil |
Coco |
Hydroponics |
|
|---|---|---|---|
|
Typical pH range |
Around 6.0 to 7.0 |
Around 5.5 to 6.5 |
Around 5.5 to 6.5 |
|
Feeding |
Some mixes are pre-fertilised |
You supply the nutrients |
You supply the nutrients through the solution |
|
Watering |
Less often, let the top dry slightly |
Little and often |
Handled by the system |
|
Best for |
The simplest start |
Growers wanting more feeding control |
Growers happy to monitor pH and EC |
Soil is one of the most familiar growing mediums, making it a realistic choice for beginners. It provides support for plant roots and can supply nutrients, retain moisture and support root development, depending on its composition.
Why choose soil?
Familiar to beginners: Soil is widely used for container growing and is easy to understand.
Nutrient support: Some mixes come pre-fertilised, giving plants an initial supply of nutrients.
Straightforward setup: Soil growing generally requires fewer specialised components than a dedicated hydroponic system.
However, soil still needs proper care. Poor drainage or overwatering can leave roots sitting in excess moisture, while nutrient levels vary between mixes. Check the product details before adding fertiliser, as pre-fertilised soil may not need extra nutrients straight away.
Most plants grown in soil do well with a pH of around 6.0 to 7.0. Soil is more forgiving than coco or hydroponics, because it buffers small swings in pH, which is a big part of why it suits first-time growers.
If you're comparing soil options for your growing setup, consider the mix's drainage, nutrient content and suitability for your plants. Adding perlite can help lighten a heavy mix and improve drainage. If you use a tray under your pots, add about 2.5 to 7.5 cm (1 to 3 inches) of pumice at the bottom of each pot to create a barrier between the soil and any water sitting in the tray.
Coco coir is a soilless growing medium made from coconut husk fibres. It holds moisture while providing air around the roots. For beginners who want more control over watering and feeding, coco can be a useful alternative to soil.
Good moisture retention: Coco holds water without behaving exactly like soil.
Root aeration: Its structure allows air to reach the roots when the medium is used correctly.
Greater feeding control: Growers can manage nutrient delivery according to their plants' needs.
Coco does require attention. Unlike many pre-fertilised soil mixes, it generally relies on the grower to provide nutrients. Beginners should follow the feeding instructions for their chosen products and avoid letting the medium become too dry or waterlogged.
A few things worth knowing before you start:
Buffered or unbuffered: Raw coco can hold onto calcium and magnesium and release sodium and potassium. Buffered coco has been pre-treated to prevent this. If yours isn't buffered, rinse and buffer it before planting.
Calcium and magnesium: Coco plants often need extra calcium and magnesium, so many growers add a Cal-Mag supplement or use a nutrient made specifically for coco.
pH and feeding: Aim for a feed pH of around 5.5 to 6.5. Water little and often, and aim for around 30% runoff (water draining out the bottom) to help stop nutrients building up in the coco.
If you're comparing coco growing mediums and supplies, check whether the product is ready to use or needs preparation before planting.
Hydroponics is a growing method where plants receive nutrients through a water-based solution instead of relying on soil. It gives you a high level of control, enabling targeted nutrition through the different stages of plant growth.
Depending on the system, roots may sit directly in the nutrient solution or grow in a support medium such as clay pebbles. Hydroponic growers also monitor the nutrient solution's pH and EC, which measure acidity and nutrient strength. Most hydroponic setups run at a pH of around 5.5 to 6.5. The right EC depends on your plants and their stage of growth, so follow the feed chart for your nutrient. A reliable pH and EC meter, such as those from Bluelab, makes regular checks quick and easy.
Direct nutrient delivery: Plants receive nutrients through the solution supplied by the system.
Control over growing conditions: Growers can adjust nutrient delivery to suit the system and plants' needs.
Different system options: Setups range from gravity-fed systems to those that use pumps to move water or nutrient solution.
Gravity-fed or pump-fed? A gravity-fed system such as Autopot uses a raised reservoir and a float valve to top up each pot as it needs water, with no pumps, timers or power required. Pump-fed systems use a pump to move the nutrient solution around, either continuously or on a timer. Gravity-fed setups are simpler to run, while pump-fed systems offer more options as you scale up.
Hydroponics also requires some planning. As a beginner, you need to understand how your chosen system works, follow nutrient instructions and monitor relevant conditions. The equipment also varies by setup, so there's no need to buy components that your system doesn't require.
The right hydroponic supplies will depend on the system you choose, so check its equipment and nutrient requirements before getting started.

Your first indoor setup is a chance to learn what works for you. Rather than buying every product that catches your eye, take time to understand your growing method and choose supplies that work well together.
If you want the simplest start, soil is the most forgiving. If you're comfortable managing feeding and want more control, coco is a natural next step. If you're keen on direct nutrient delivery and don't mind a bit more planning, hydroponics is worth considering. There's no wrong starting point, only the one that suits your space, routine and experience.
Soil, coco and hydroponics each offer a different approach to indoor growing. Understanding their needs helps you choose suitable supplies and avoid unnecessary equipment.
At Hydro Warehouse, we support NZ home and hobby growers with over 10 years of industry experience, offering growing mediums, nutrients, and equipment, including complete hydroponic kits in New Zealand. As a Kiwi-owned and operated business, we make it easy to shop online or visit our Manukau store to explore our range in person.